HDG COIL

Hot-dip Galvanized Steel (GI: Zinc Coated Steel)Coil/Sheet/Plate/Strip 1. Width: 400-1534mm 2. Thickness: 0.15-5mm Hot-dip Galvanized Steel (GI: Zinc Coated Steel) Coil/Sheet/Plate/StripHDG steel coilG.I steel coilG.I coilGI Galvanized steel sheetGalvanised Steel Sheet in CoilDetailed Product Description:

Specification		JIS G3302 1998					ASTM A653M / A924M 1998
		SGCCSGC340400440490570	SGCH	SGCD1SGCD2	SGCD3	SGHCSGH340400440490	CSType ABCFSType AB	SS Grade230255275340	SS Grade550	DDS
Thickness of Base Steel (mm)		0.20|2.00	0.23|2.00	0.30|2.00	0.60|1.60	1.2|4.50	0.20|4.50	0.20|4.50	0.23|2.00	0.30|4.50
CoatingMass	Regular Spangle	Z08, Z12, Z18, Z20, Z22, Z25, Z27, Z35, Z45		Z08|Z35		Z10|Z45	Z120, Z180, Z275, Z350, Z450			Z90Z120Z180Z275Z350
	Minimized(Zero)Spangle			Z08|Z35		Z12|Z35	Z120, Z180, Z275, Z350
	Galvan-nealed	F10, F12, F18					ZF120, ZF180
Surface Finish		Regular Spangle, Minimized(Zero) Spangle, Extra Smooth and Galvannealed
Surface Treatment		Chromating Treatment, Oiled or Resin Coated (anti Finger Print)
Coating Thickness		Min. Single Side Coating Thickness: 50 g/m2Max. Single Side Coating Thickness: 225 g/m2
Remarks		1.Tolerance for thickness, width, flatness and so on.can conform to the requirements of JIS G3302 or ASTM A653M / A924M.2.All products with thickness 2.0mm and under can be skin passed.3.The specification for thicknesses under 1.6mm for hot-rolled base metal according to JIS G3302 will be the same as for thickness 1.6mm and over.4.Coil inside diameters can be either 508mm or 610mm, maximum coil outside diameter is 2000mm. Weight of a single coil can be from 5 to 30 metric tons.5.Please contact JOINME STEEL. for Special specifications.6.The specification of ASTM such as A653M, A792M, A875M / A924M and etc. have been updated to the latest revisions

Available Size:Hot-dip Galvanized Steel Coils (Zinc Coated Steel)Thickness: 0.15~5mmWidth: 400~1534mm

Type	Coating Mass	Thickness (mm)	Width (mm)
CGI	Z08~Z27	0.2~2.0	30~1524
HGI	Z08~Z27	1.2~5	30~1524

Producting Process:Technical Specification : for reference  Usage/ Application:Package sample picture:

 

Guide to Ordering  When placing an order, check the following items according to the intended use. 

1. Specification

2. Size

3. Packaging Mass

Specify the packaging mass in consideration of unloading capacity and working conditions.

Cut Sheets: Normally, 2 tons or more are standard

Coils: Normally, available from 5 tons - 20 tons

Specify the maximum weight (and the minium weight, if necessary)

4. Coil ID/OD

For coils, the inside diameters of 508mm (20 inches) or 610mm (24 inches) are standard. Specify the maximum outside diameter acceptable, if necessary.

5. Surface Finish

6. Reversal Use

Normally, appearance quality is guaranteed for the top side of cut-sheets, and for the outside surface of coils. If the guaranteed side is to be the reverse side of the end product, or if both sides become the face sides of the end products, so specify before hand.

7. Edge Finishing

Specify “slit edge” depending on the conditions of use. Slit edges are recommended especially when the delivered product is used as rolled without further processing, thus requiring edge finishing, or when strict width tolerances are required.

8. Applications

JoinMe Steel exercises thorough quality control over the entire process of manufacturing so as to make ordered products suit the customer’s intended use. When placing an order, therefore, the customer should give the information necessary for quality control, such as intended use and the method of fabrication.

9. Other

Dimensional accuracy, shapes and other requirements are usually within the ranges of JIS. However, assembling accuracy, component accuracy and other conditions may require more rigorous specifications. In such cases, consult us before hand to identify needed specifications.

We offer steel:

From StockJoinMe Steel offers steel products directly from stock to meet prompt shipment demands. We mostly keep HEA, HEB, IPN, IPE, UPN, Steel Plates, Steel Sheets, Angles, Flat Bars, Round Bars and Square Bars in stock.From ProductionIn addition to ready stock, JoinMe Steel supplies steel products from new production to it’s customers.

OUR PRODUCT RANGE INCLUDES:Flat Rolled Products- Hot Rolled Coils, Slits and Sheets- Cold Rolled Coils, Slits and Sheets- Pickled & Oiled Coils and Sheets- Hot Rolled Plates- Hot Dip Galvanised Coils, Slits and Sheets- Electrogalvanised Coils, Slits and Sheets- Prepainted Coils, Slits and Sheets- Tinplate Coils and Sheets, Aluzinc (Galvalume) Coils- Galvanized Corrugated Sheets- Floor / Chequered Sheets (Diamond Shape or Tear Drops)- Stainless Steel, Sheets and CoilsLong Products- Reinforcing Bars (Rebars- Plain or Deformed)- Wire Rod- Wire Mesh- INP, UNP- HEA, HEB- IPE, UPE- Equal and Unequal Angles- Square Bars- Round Bars- Flat Bars- T-Bars and RailsTubes, Pipes, Hollow Sections- Hollow Sections (Square, Rectangular)- Water and Gas Pipes- Large Diameter Steel Pipes (Spirally Welded Steel Pipe)- Seamless Pipes

Container Shipment:

Bulk Shipment:

Truck Shipment: 

" DO THE BEST STEEL SUPPLIER "

HDG COIL